Routing Module
The LiveNX Routing technology module provides real-time routing-layer visualizations for Cisco networks. In addition, the module’s policy-based routing feature provides a high degree of control, allowing users to route traffic easily and predictably over user-specified paths. For more details, refer to Routing.
Features
• System-level topology view of active routes
• Displays by protocol, directionality, and destination
• Mouse-over displays individual route statistics
• Next-Hop Routing visualization
• OSPF and EIGRP neighbor adjacency
• Device route-table views in graphical and tabular form
• Shows destinations for interface
• Displays all entries or filtered entries only
• Route display filtering by protocol
• Filters by direct and static routes
• Filters EIGRP, OSPF, BGP, and RIP protocols
• Filters per user and periodic downloaded static routes
• Other filters: IS-IS, mobile, on demand, IGRP, EGP
• Route display filtering by destination
• Shows default route
• Shows routes to destination IP address
• Shows routes to destination network
• Export function
• Exports route and route table information for further analysis
• Exports forwarding tables to CSV file (by device)
• Refresh real-time updates of routing layer—refreshes all routes or specified routes only
• Troubleshooting capabilities
• Displays routing loops and asymmetric routes
• Alerts to routing instabilities
• Detects black holes
• Provides error summarization
• Policy-based routing (PBR)
• Configuration and editing of PBR and Set statements
• Editing of existing route map configurations
• Validates user entries to ensure PBR compliance
• Displays indicate where PBR is applied
• Exports route map statistics
• Displays static routes and PBR issues
• Virtual Routing and Forwarding (VRF) visualization
• Displays virtual routing and forwarding tables
• Exports VRF tables to CSV file